DC Linear Actuator / Motor Wireless Remote Switch with Time Delay Function (Model 0020088) Fully Retracted Length and Stroke Customization 2) Connect two normally open

2) Connect two normally open terminals of a limit switch to terminals <UP> and <COM> on the controller

50MM (2 in) Actuator 100MM (4 in) Actuator 150MM (6 in) Actuator 200MM (8 in) Actuator 250MM (10 in) Actuator 300MM (12 in) Actuator 350MM (14 in) Actuator 400MM (16 in) Actuator 450MM (18 in) Actuator 500MM (20 in) Actuator

Note 1: The specified retraction length must be less than the standard retraction length of the ordered actuator

Connect the manual switch to the controller's manual switch terminals as follows:

Stroke and Length (Model 0041555) Parameter Value Stroke 450mm Retraction Length 700mm (center distance between two mounting holes when the linear actuator is fully retracted) Extension Length 1150mm (center distance between two mounting holes when the linear actuator is fully extended) The linear actuator has two built-in limit switches

DC Linear Actuator / Motor Wireless Remote Switch with Time Delay Function (Model 0020088) Fully Retracted Length and Stroke Customization 2) Connect two normally openProduct Operation Demonstration Video: Mode 1: Operation in Delay Working Mode Mode 2: Operation in Single Signal Trigger Delay Working Mode Mode 3: Operation in Automatic Cycle Working Mode Package Include: 1 x Receiver: S1PFD DC 1 x Transmitter: CP 3 1 x User manual Application: This receiver is a wireless controller for DC motor or linear actuator, it and the transmitter form a wireless transmitter receiver system. If you connect a DC motor to this