4030-3.1/8 Taper Locking Bush 3.1/8 inch Bore Shields Reversing drives are not a

Reversing drives are not a problem

Static 11000 Cor

1 mm Outside Diameter (de) 292 mm Diameter Over Chain (A) 296 mm Taper Lock Bush 1210 Type 1 Overall Length (L) 25

65 mm Abutment diameter housing

the heater creates a low temperature difference between the inner and outer ring of the bearing

4030-3.1/8 Taper Locking Bush 3.1/8 inch Bore Shields Reversing drives are not aTaper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools Bore: 3. 1 8 inch Mass: 5. 9kg Keyway: 0. 875x0. 264 inch Bush size: 4030 Width: 76. 2mm Diameter: 146. 05mm Tightening Torque (Nm): 170 Set screws quantity: 3 Set screws size: 5 8 inch To Install: 1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half