6209C4 NSK Open Deep Groove Ball Bearing 45mm inside x 85mm outside x 19mm wide Tags a 146 mm Distance between

a 146 mm Distance between the apexes of the pressure cones

Renold manufactures its own

Turning the pulling hooks enables them to be used both internally and externally

Outside length: 2262mm

Attainable speed for oil-air lubrication 9 000 r/min

6209C4 NSK Open Deep Groove Ball Bearing 45mm inside x 85mm outside x 19mm wide Tags a 146 mm Distance betweenNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass