6803 NSK Open Deep Groove Ball Bearing 17mm inside x 26mm outside x 5mm wide Shields 85 mm Shoulder diameter of

85 mm Shoulder diameter of inner ring (large side face)

static: 930

The KBO12-PP INA is a ball bushing or linear ball bearing from INA machined range

Double lip Viton metric rotary shaft oil seal with garter spring 85mm inside x 110mm outside x 12mm wide

Single lip Viton metric rotary shaft oil seal with garter spring 140mm inside x 170mm outside x 15mm wide

6803 NSK Open Deep Groove Ball Bearing 17mm inside x 26mm outside x 5mm wide Shields 85 mm Shoulder diameter ofNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass