63/32NR NSK Open Deep Groove Ball Bearing with Snap Ring Groove. 32mm inside x 75mm outside x 20mm wide Open Pitch length: 1757mm

Pitch length: 1757mm

the clearance fit connecting plate being secured by means of a spring clip

SKF 6215-2RS1 is a high quality single row deep groove ball bearing

SKF 6213-2RS1 is a high quality single row deep groove ball bearing

Double lip Viton metric rotary shaft oil seal with garter spring 100mm inside x 130mm outside x 12mm wide

63/32NR NSK Open Deep Groove Ball Bearing with Snap Ring Groove. 32mm inside x 75mm outside x 20mm wide Open Pitch length: 1757mmNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass