6214C3 NSK Open Deep Groove Ball Bearing 70mm inside x 125mm outside x 24mm wide Shields allowing it to handle high

allowing it to handle high radial loads while maintaining a minimal radial cross-section

4 mm Distance side face to pressure point

LOCTITE 380 BLACK is a black

d a min 21

Width T: 40mm

6214C3 NSK Open Deep Groove Ball Bearing 70mm inside x 125mm outside x 24mm wide Shields allowing it to handle highNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass