7204-B-XL-TVP FAG Angular Contact Bearing 20x47x14mm Open Technical Data

Technical Data

Bush number: 1610

Pin length L: 31

If the separating jaws are screwed into the tightening device the other way round

Seals: 2RS1 - Rubber seals on both sides

7204-B-XL-TVP FAG Angular Contact Bearing 20x47x14mm Open Technical DataFAG Single row angular contact ball bearings are particularly suitable where: Bearing arrangements must support combined loads, i. e. radial and axial loads acting simultaneously Moderate to high loads are present on one side Rigid axial guidance is required The bearing arrangement must be axially clearance free or preloaded High speeds are required under higher radial and axial loads The bearing arrangement is to run quietly in addition to meeting