63/28C3 NSK Open Deep Groove Ball Bearing 28mm inside x 68mm outside x 18mm wide Closed Pitch length: 3698mm

Pitch length: 3698mm

Mass Kg: 29

max) Higher temperatures are only admissible at lin ear bushings without wiper seals with ball re tainers made of steel

Kukko quality standards

C - Cup width: 32

63/28C3 NSK Open Deep Groove Ball Bearing 28mm inside x 68mm outside x 18mm wide Closed Pitch length: 3698mmNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass