6010DDUNR NSK Sealed Deep Groove Ball Bearing with Snap Ring Groove 50x80x16mm Tags Datum/Pitch length 2190mm

Datum/Pitch length 2190mm

Dynamic: 160kN

the 6315-2Z is protected from larger particles and contaminants while maintaining low-friction operation

This type of bearing unit is suitable where mounting space is limited or where it is necessary to minimize the distance between shafts

Inside dr: 10mm (tolerance 0 to -6µm)

6010DDUNR NSK Sealed Deep Groove Ball Bearing with Snap Ring Groove 50x80x16mm Tags Datum/Pitch length 2190mmNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass