MRS-6 Magnification Reference Standard 1,500x - 1,000,000x - Adapter Retainer & Mounting MRS-6:on standard commonly used 1/2" (12.7mm) pin stub with 1/8" (3.2mm) pin During scanning in contact mode

During scanning in contact mode using a 0

Hole Width 113µm

Contact resistance is typically 10 kOhm depending on contact radius measured on a silver surface

A practical way to store and dispense AFM/STM discs

Calibration Standard

MRS-6 Magnification Reference Standard 1,500x - 1,000,000x - Adapter Retainer & Mounting MRS-6:on standard commonly used 1/2" (12.7mm) pin stub with 1/8" (3.2mm) pin During scanning in contact modeDESCRIPTION Retainer & Mounting MRS 6 on standard commonly used 1 2" (12. 7mm) pin stub with 1 8" (3. 2mm) pin Retainer & Mounting MRS 6 on Hitachi 15mm x 6mm stub 0. 08, 0. 1, 0. 2, 0. 5, 1, and 2m PITCH PATTERNS 3 BAR PATTERNS from . 08 TO 3m 1M PITCH TEST GRID X 20m 3 NM INDIVIDUAL PITCH 2 UNCERTAINTY! 2NM CUMULATIVE PITCH 2 UNCERTAIN This is the next generation, NIST and NPL (NIST counterpart in the U. K.) Traceable, Magnification Reference